Pen Type Water TDS Tester

Auto shut-off: 10 minutes 1 Range: 0~9990ppm (mg/L) 2 Resolution:1 ppm (mg/L) 3 Auto Shut-off and Data Hold Packaging & Delivery

Packaging Detail:	One piece per Box, outer package box is custominzed
Delivery Detail:	2000pcs in two weeks

Specifications

Auto shut-off: 10 minutes Calibration: Factory Calibrated Temperature Compensation: Automatic size: 142*25*15mm

MODEL	LH-T2
Range	0~9990ppm 0-99°C or 32-212°F
Accuracy	±2%F.S
A T C	0 to 60°C
Auto shut-off	10 minutes
Power	2×1.5v(button cell)
Dimensions	142×25×15mm
Weight	30g

Range:    0~99C  32~212F  

Accuracy:  ±2%F.S

Auto shut-off: 10 minutes

Calibration:  Factory Calibrated

Temperature Compensation:   Automatic

Operating Temperature:    0~50C

Power source: 2*1.5v(button cell)

size: 142*25*15mm

weight: 36g

Pen type TDS METER

 1 Range: 0~9990ppm (mg/L) 2 Resolution:1 ppm (mg/L)3 Auto Shut-off and Data Hold4 Temperature Compensation:Auto

5 Accuracy: ±2%F.S

6 Calibration:Factory Calibrated

7 Operating Temperature: 0~50°C

8 Power source: 2×1.5v(button cell)

9 TDS meter size: 142X 25X15mm

10 TDS meter weight: 36g

OPERATING  INSTRUCTIONS

1.remove the protective cap.

2.press the ON/OFF button once out of the water. The TDS meter will read “000”

3. Immerse the TDS meter into the water no more than 2 inches.

4.wait for the display to stabilize. The TDS meter automatically compensates for temperatures variations. Once the readout stabilizes(10-30seconds), press the HOLD button to view out of the water.

5.press the ON/OFF button again to turn off the TDS meter. The TDS meter will shut off automatically after 10 minutes of non-use.

6.after usage, shake off the water from your TDS meter or wipe it with a tissue.

Note: If the tester displays a flashing”X10”icon, multiply the reading by 10.

Pen Type Water TDS Tester